APC Smart-UPS SRV 2000VA 230V

In stock
UPS topology Double-conversion (Online)  
UPS topology  The two main UPS topologies are Double-Conversion True Online and Standby / Eco. Many quality-based considerations are involved when choosing the the optimal UPS for the job, like how they are coping with voltage disturbances. Double-conversion (Online)  
Output power capacity  The maximum power that the device can produce. 2000  
Output power  The power that the device can produce. 1600  
Waveform Sine  
Input operation voltage (min)  The minumum voltage needed by the device during operation. 160  
Input operation voltage (max)  The  maximum input voltage supported by the device. 280  
Input frequency  The frequency (Hz) which is required to power the product. 40 - 70  
Output operation voltage (min)  The minumum voltage produced by the device during operation. 220  
Output operation voltage (max)  The maximum output voltage produced by the device. 240  
Output frequency 50/60  
Surge energy rating  A surge protector is an appliance designed to protect electrical devices from voltage spikes. A surge protector attempts to limit the voltage supplied to an electric device by either blocking or by shorting to ground any unwanted voltages above a safe threshold. The surge energy rating is a measure of how much energy a surge protector can theoretically absorb in a single event, without failure. 600  
Crest factor 3:1  
ECO mode Yes  
Output voltage Total Harmonic Distortion (THD) 3  
Output voltage Total Harmonic Distortion (THD) 3  
Surge protection Yes  
Audible alarm(s)  Alarms that make a sound when they are activated (set off). Yes  
Audible alarm modes Alarm when on battery,Low battery alarm,Overload alarm 

High quality, Double-conversion On-line UPS designed for essential power protection needs even in the most unstable power conditions

Automatic internal bypass
Supplies utility power to the connected loads in the event of a UPS power overload or fault.
Automatic restart of loads after UPS shutdown
Automatically starts up the connected equipment upon the return of utility power.

ECO Mode
Operating mode that by-passes unused electrical components in good power conditions to achieve high operating efficiency without sacrificing protection

Input power factor correction
Minimizes installation costs by enabling the use of smaller generators and cabling.

Intelligent battery management
Maximizes battery performance, life, and reliability through intelligent, precision charging.

LCD display
Alpha-Numeric Display which displays system parameters and alarms.

Serial connectivity
Use any Home Automation network to monitor and control the S20 through its RS-232 serial port. For information on how to communicate with the S20, see APC's Application Note #102. Crestron and AMX installers should visit their respective websites for information on how to integrate the S20 into those networks.

USB connectivity
Provides management of the UPS via a USB port (not available on all models).

More Information
Flavour N/A
Flavor From Setup Method N/A
Ves Color N/A
Write Your Own Review
You're reviewing:APC Smart-UPS SRV 2000VA 230V